17 3/4" deep by 5 1/4" high, this vented rackshelf has a 60lbs. weight capacity and a rear flange slotted for horizontal wire management. Constructed from 16-gague steel and finished in a black powder coat.

Ideal for use in our open frame racks. This vented 3 1/2" (2 space) shelf is 18" deep with a 50lbs. weight capacity. Constructed from 16-gauge steel and finished in a durable black powder coat.

Accommodating components too wide to fit the 17 3/8" inside width of standard rackshelves, these shelf systems fit units up to 22 1/2" wide an either bolt into millwork or to the mounting angle of standard rackrail. Measuring 5 1/4" high, this shelf saves room by requiring no rackspaces. The WUSS system comes complete with a a pair of ears, a bottom, and appropriate assembly hardware.

Designed expressly for use in Slim 5, AXS, SRSR, and WR equipment racks, SH series zero space rackshelves feature full-depth front and rear rack mounting, providing a secure shelf for non-rackmount components. This "zero-space" shelf mounts to the side of the rackrail (not the threaded face), providing more useable shelf area. Two handy "L" brackets are included to help position equipment. Made from 16-gauged steel, includes mounting hardware and a black powder coat finish.

Unlike standard adjustable shelves, the entire VSA shelf telescopes to reach rear rail, providing a range of useable depth from 16" to 44". Providing the greatest useable depth in its class, the heavy-duty VSA is ideal for even the deepest components. Constructed of hemmed 16-gauge steel and finished in a durable black powder coat, the VSA is fully vented for superior cooling and features many tie points for enhanced cable management.

With a front to rear mounting adjustment range from 19 1/2" to 28" deep, the versatile AS3-22 shelf is vented and rackmounts most video decks and tower CPU's. Built expressly for heavy equipment, ships ready-to-assemble with included hardware and supports 450lbs.

Note: Fits in racks with a minimum 22 1/2" useable depth

The VDS shelf is a vented mounting solution for most deep equipment. This shelf has a front to rear mounting adjustment range from 23 1/2" to 32". Features a substantial 200lb. Weight capacity.

Note: Fits in racks with a minimum 25 1/2" useable depth

Captivate components with RC and CAP series clamping rackshelves. Rubber-lined clamps secure a components from the top. Adjustable rear "L" brackets ease a secure fit. Vented bottoms with a robust 16-gauge steel design that maintains structural integrity in mobile applications. Finished in a durable black powder coat.

Superior ventilation for cable and satellite boxes or any components that generate considerable heat. Adjustable rubber lined clamping bars on the top and bottom secure components and the open design allows a higher level of equipment density within the rack. Constructed from 16-gauge steel, finished in a durable black powder coat.

Note: Shelf only, Cable/Satellite Box not included

The SS sliding shelf is both functional and rugged. Capable of latching in an open or closed position, the shelf slides on ball bearings and extends a full 14" and mounts to any rack (rear rackrail required in steel racks). Occupies slightly more than a single rackspace.

Note: Fits in racks with a minimum 14 3/4" useable depth

Filling just a single rackspace, the low profile SSl sliding shelf extends 10" on nylon roller slides equipped with positive-stop lockouts. A telescopic rear support mounts to any rack (rear rackrail required in steel racks). The shelf itself is made with an attractive black laminate material.

Note: fits in racks with a minimum 14 3/4" useable depth

Mount smaller components, wireless units and other gear horizontally with the UTR1 half/third-rack shelf. Now includes hook-and-loop strips for component mounting, and features an enhanced ventilation pattern. Constructed from 16-gauge steel with a 25lbs. weight capacity and finished in a durable black powder coat.

Vented KD Series rackshelves ship ready-to-assemble to minimize freight costs and save storage space. Ear heights range from 2 to 10 space and are sold in pairs. All assembly hardware included.

The FWS fixed single bay writing/computer keyboard shelf bolts quickly to any 19" rack to create an ideal workspace. With an attractive, black laminate top made from 3/4" furniture-grade MDF board, it occupies 2 rackspaces and comes complete with special rail-mounting hardware.

Wall mounting non-rackmount components is much easier with our fully welded WMS wall mount shelf. The bottom is vented to help keep things cool and features 1/2" and 3/4" electrical knockouts for cable pass-through. The WMS-20 can also be used to mount RK series racks